Microwave Radio Links Antennas
The antennas included in this product line follow the requests of the Telecommunication Markets and cover the frequency bands from 2GHz up to 38GHz and the size from 0.2m up to 4m.
Depending on the antenna types, our design approach has been devoted to provide not only standard antennas but also antennas exhibiting exclusive characteristics such as high gain, low side-lobe levels, high cross-polar discrimination behaviour.
The THP Antennas are available in 0.2m up to 1.8m diameter sizes and provide cost-effective solutions for terrestrial microwave systems operating at frequency bands between 6 to 42 GHz.This Antennas family is characterized by reduced length shields that permits achieving low profile visual impact and are suitable for applications in cellular systems to link ...
HP Antennas are characterized by low VSWR, high feed-horn efficiency and by a tight profile tolerances of the reflector surfaces which allow improve the radiation characteristics.All the HP Antennas are equipped with fabric or solid (depending on the antenna size) radomes and aluminium mantel fixed to the reflector edge. The mantel internal surface is covere...
SHP Antennas are similar to HP antennas and differ from them by exhibiting ultra directive radiation patterns with low near and wide angles side-lobe levels as well as high front to back ratios
For further details, please do not hesitate to contact us
...
The HXPD antennas are similar to those of the SHP Antenna family as far as the co-polar radiation characteristics are concerned however they exhibit in addition a high low cross-polar discrimination level centred around the antenna axis and also in the 45deg. planes where the cross polar levels reach the highest values.These Antennas are developed for high c...
IPER Antennas are characterized by a serrated screening ring fixed to the reflector edge to improve the radiation characteristics by reducing the spill-over , the wide angle side lobes levels and the Front to Back ratio ( as compared to that of the STAR antennas) with a corresponding improvement of the antenna directivity.IPER Antennas are a good ...
STAR Antennas family includes reduced cost antennas without mantel and protecting cover. These antennas are widely used in applications where high front to back ratios and low side lobe levels are not mandatory requests.STAR Antennas can be supplied with aerodynamic radomes to reduce wind loads.
For further details, please do not hesitat...
GRID Antennas are characterized by reflecting surfaces made of a set of aluminium pipes with a suitable frequency dependent pitch that allows achieving high reflectivity levels.GRID Antennas are available in sizes from 0.6m to 6.0 m diameter. Typical advantages of this antenna family are reduced weight as well as low wind load levels.
For further de...
Dual Band Antennas belong to the line of antennas that are mainly designed to meet the requirements of saving space and reducing dynamic loads on the supporting tower by providing two or four ports on two different bands for single or dual polarization independent links. The use of dual band single antennas allows also the achievement of frequency diversity ...
